Roof Installation Service

Your home doesn’t simply need a roof; it needs a good roof installation service that will give it the right touch and taste. There is a broad variety of choices at Roofing Townsville, and it is dependent on how you would like your roof to be. As much as you’re trying to hire professional installation services, you still need to know how the installation process works for your safety and housekeeping.

The material you need for your new roof should be considered before you start the installation process. Roofs are made from asphalt, slate, metal, wood, clay, or any other material that seems proper for a roof.  

Asphalt shingles are some of the most basic roofing materials, and to use them, you have to start by laying some shingles to the roof bottom and use a nail to lock them in. Then you go ahead to lay another row and repeat this procedure till it covers all corners of your roof. Your underlayment has to be installed well to avoid water from getting into your home.

Metal roofing installation involves installing a string line at the centre of the peak and then holding the string line in place. This is done to make your overhangs leveled. Be sure to let the first roof piece be in the same shape you want your entire roof to be. For instance, if you want a square-shaped roof, then allow the first piece to be square-shaped. Lay the roofing and ensure the taller ridge faces the right side; and then, screw the panels to your roof. The process goes a long way, so when you want a professional for roofing installation, count on Roof Installation Townsville. 

Free instant Quote

Before The Installation

Before roofing installation occurs, these are procedures that the expert will follow, and you need to take note of them to be sure that the process is done successfully:

  • Removing the old roof: The old roof has to be removed before a new one can be installed.
  • Sheathing Examination: You have to examine the sheathing and be sure that moist areas are absent and there isn’t any damage. The sheathing consists of some flat panels used as roofing support. If you notice anything that seems wrong about the sheathing, then consider replacing it.
  • Install a water barrier: Ensure that you’re prepared ahead of the winter and rainy seasons. A water barrier is installed around the edges of your roof to prevent the accumulation of ice.
  • The Drip Edge: Place the drip edge on the two different parts of the roof; the lower part and the sides of the roof.  

Install a roofing underlayment: A roofing underlayment also prevents water from getting into your house from the roof, so it is important to have synthetic roofing underlayment. To do this, you’d have to roll your underlayment around the edges and then use cap roof nails to keep it in place. The cap nails have to go above the drip edges.

Scroll to Top